INTERDISCIPLINARY SENIOR ENGINEER – CIVIL/HTRW
Company Website U.S. Army Corps of Engineers - Seattle District
About the Position: Serves in a dual capacity as a senior engineer responsible for development of a wide variety of detailed civil and Hazardous, Toxic, Radioactive, Waste (HTRW) specifications for civil, military, and HTRW projects.
Apply at: https://www.usajobs.gov/job/717015500
Open to U.S. Citizens
-Develops a broad range of detailed civil and HTRW specifications and related specifications involving structural, electrical, mechanical, and architectural features.
-Coordinates status of specifications with other specification writers and disciplines concerning completeness and scheduling.
-Assures correctness of specifications in order to assure validity and biddability.
-As a technical advisor, makes work assignments, objectives, time limitations for completion to other engineers/architects/technicians within the section.
-Resolves difficult and controversial problems in coordination with supervisor and project manager.
-Prepares amendments and field changes, proposed project modifications and coordinates with applicable design sections for their technical input and comments.
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for an ARCHITECT:
A. Degree: Bachelor’s degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum – Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect’s office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
Basic Requirement for Civil, Environmental, Mechanical or Electrical Engineer:
A. Degree: Bachelor’s degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board’s eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum – Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting a basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Qualifications for the GS-11:
Specialized Experience: One year of specialized experience which includes writing specifications involving at least TWO of the following disciplines: civil, structural, electrical, mechanical or architectural features/specialties. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture, Civil Engineering, Mechanical Engineering or Electrical Engineering.
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Qualifications for the GS-12:
Specialized Experience: One year of specialized experience which includes writing specifications for civil or military construction projects in at least ONE of the following areas: (1) Projects involving one or more contractors’ onsite, to include coordination with other agencies; (2) Projects for public sector, such as, dams; transit; medical facilities; airfield, etc. (3) Projects involving Hazardous, Toxic, Radioactive and Waste (HTRW) clean-up and remediation. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone–no substitution of education for experience is permitted.
The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist (External).
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
Your resume may be submitted in any format and must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
For additional information see: What to include in your resume.
2. Other supporting documents:Cover Letter, optional
Most recent Performance Appraisal, if applicable
This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education, you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person’s personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
For any questions please contact Mindy Kincaid: firstname.lastname@example.org